Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Burbank
If your gate in Burbank is stuck open, dragging on its post, or failing to stop when a car crosses the path, you’re dealing with one of three things: a dead control board, a mechanical failure in the hinges or track, or a safety sensor that’s drifted out of alignment. Most Burbank gate repairs are finished in a single visit, and we give you the written price before we unscrew a single panel. Call (424) 258-8818 and a live person answers, 24 hours a day.
We know Burbank’s gates. The wrought-iron swing gate on a Chandler Boulevard bungalow from 1952 has different failure points than the heavy slide gate on a mountaintop property off Bel Aire Drive. Same city, different physics. Our Gate Repair team works both, plus everything in between.
Why Vance Gate Repair Tarzana Is Burbank’s Preferred Gate Repair Company
We’re a gate company, not a general handyman service. That matters in Burbank, where a gate on a ranch home in the Rancho neighborhood might sit on a post set in 1960, while a production-facility gate on Olive Avenue cycles more in a week than that ranch gate does in a year. Both need someone who’s seen the failure mode before it leaves the gate stuck on a Friday evening.
Our founder Adrian Vance started in commercial access-control work in 2014, which is why we still carry the habits that industry demands: written scope before work starts, photographed evidence when the job’s done, and wiring diagrams we actually file. The Haven Standard means every Burbank customer gets a documented photo record of what we found and what we changed. No guessing, no “the guy before you did it wrong” storytelling that you can’t verify.
We get to Burbank quickly because we serve the city directly from our Los Angeles metro operation. Response time to most Burbank neighborhoods is short enough that your gate isn’t blocking the driveway overnight. A background-checked, uniformed technician is dispatched with the name and photo sent to you before arrival.
Our Gate Repair Services in Burbank
Electric Gate Repair
Electric gate repair in Burbank often starts with the control board. When July pushes past 100 degrees for a week straight, old circuit boards cook. Capacitors swell, solder joints crack, and the gate stops responding or gets erratic: opens halfway, reverses for no reason, ignores the remote entirely. We diagnose the board first, not the motor. A board swap on a mid-range operator typically stays under $400, parts included, and we’ll photograph the failed component before we replace it. For boards that have been discontinued, we source through local parts channels in the San Fernando Valley rather than steering you toward a full operator replacement you may not need.
Automatic Gate Repair
Automatic gate repair covers the full system: operator, remote receivers, keypads, safety photo-eyes, and the limit switches that tell the gate where to stop. The photo-eye (the infrared beam that stops the gate if something crosses the path) is the most common culprit when a Burbank gate won’t close. It gets knocked a few degrees out of alignment, or dust builds up on the lens, and the system refuses to move. We see this on almost every street from Glenoaks to Magnolia. That’s a quick fix, usually under $200. If the operator itself has failed, swing-gate motor replacements in Burbank typically run $650 to $1,400 depending on the brand and whether the arm bracket is intact.
Hinge & Post Repair
Burbank’s ranch homes and bungalows, most built between the 1940s and 1960s, are full of gates that predate modern hardware. The hinges are worn to half their original thickness. The post has shifted out of plumb. The gate scrapes the ground or won’t latch. In Burbank’s Rancho neighborhood, we rebuilt a sagging double-swing ornamental iron gate where the post footing had shifted and the hinge post was pulling away from the wall. Our crew reset the post footing, replaced the worn hinges, and retrofitted a modern LiftMaster gate operator with a safety photocell pair, bringing a 1960s gate up to current UL 325 entrapment-protection standards. That’s the kind of job we do regularly here. Teardown and hinge replacement on a standard single-swing gate runs $350 to $700 in Burbank, with post footing work additional if the concrete has broken down.
Gate Realignment
When a gate starts to drag, bind, or fail to close fully, the issue is usually alignment. Burbank’s expansive clay soil shifts through the year, enough to move a post a quarter inch. Over time that becomes a gate that won’t latch or a slide gate that jumps its track. Gate realignment in Burbank typically costs between $200 and $450, depending on whether we’re adjusting the gate on its hinges or re-setting a slide track that’s been pulled out of spec. We’ll bring the levels, measure the reveal, and photograph the after. You’ll see the difference in the numbers, not just your own eyes.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterCommon Gate Repair Problems We See in Burbank Homes
- Dead or failing control boards from summer heat. Burbank regularly hits 105 degrees in July and August, and those temperatures push older operator boards past their thermal limits. We keep replacement boards for LiftMaster, DoorKing, and FAAC units in local stock because this isn’t a rare event here.
- Slide-gate derailment from Santa Ana winds. Homes along the Verdugo Mountains and the hillside streets above Kenneth Road feel the wind first. Gusts put lateral pressure on tall gates, bend the track, and snap the bottom rollers. We commonly reset tracks and replace roller assemblies after wind events.
- Hinge and post fatigue on 1950s and 1960s gates. The ornamental iron gates around Verdugo Woodlands and Magnolia Park are beautiful, and most have been hanging fifty years or more. The metal holds up, but the hinges and the concrete around the post do not.
- Photo-eye misalignment and entrapment sensor faults. Older automatic gates that were installed before modern UL 325 standards often lack non-contact sensors, or the sensors they do have are misaligned. We retrofit photo-cell pairs as part of almost every older operator we service.
Pricing for Gate Repair in Burbank, CA
Here’s what you can expect on a gate repair bill in Burbank. A hinge replacement on a standard single gate: $350 to $700. Gate realignment: $200 to $450. Photo-eye repair or replacement: $150 to $250. Control board replacement: $200 to $400 for most residential units. Full swing-gate operator replacement, parts and labor: $650 to $1,400 depending on the brand, the motor’s torque rating, and whether the existing brackets can be reused. Weld repair on a cracked ornamental gate: $150 to $400 depending on the work required and whether we’re grinding out rust first.
Every price is written down and handed to you before any work begins. That’s Clause 1 of our Haven Standard. No “well, it turned out to be more involved” conversation at the end. You’ll know the number before we touch anything.
Call (424) 258-8818 for a free estimate, and we’ll write the price in front of you before a single tool comes out of the truck.
Trusted Brands We Service in Burbank
We service LiftMaster, DoorKing, Elite, Mighty Mule, BFT, FAAC, Linear, Viking, and Ghost Controls. Nine major automation brands, because the right answer for a sagging ranch-home gate isn’t “replace the motor” when the motor is a two-year-old LiftMaster and the actual problem is a post that’s moved out of plane. We stock local parts for Burbank customers and repair whatever operator is already on the property. A DoorKing slide operator on a commercial gate on Pass Avenue gets the same documented treatment as a Mighty Mule on a San Fernando Boulevard driveway.
We Also Serve Cities Near Burbank
Our crews work in Burbank and the cities around it every day. We take Gate Repair in Burbank calls from North Hollywood, Studio City, Van Nuys, and West Hollywood as well. If you’re on the border of Burbank and Toluca Lake, you’re still getting the same written-price, documented-photo service.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Burbank
You can almost always retrofit a modern operator onto an older gate, provided the gate itself is sound at the hinges and the post is solid. We routinely fit LiftMaster and other current operators onto gates from the 1950s and 1960s in Burbank, including in Rancho and Verdugo Woodlands. The key is checking the gate’s weight, the hinge condition, and the post’s footing before selecting the operator. We also install safety photo-eyes to bring the system up to current UL 325 entrapment-protection standards. If the gate is rusted through at the welds or the post has shifted significantly, we’ll tell you honestly, with photos, and give you a written price for both the retrofit and, separately, the replacement so you can decide. Call (424) 258-8818 for a written quote.
Santa Ana winds push tall slide gates sideways, which bends the track, breaks bottom rollers, and causes the gate to bind or derail. We see this often on Burbank hillside homes near the Verdugo Mountains, where the wind channels through the canyons. A typical wind-related repair involves re-truing the track, replacing one or two roller assemblies, and checking the cantilever brackets for stress cracks. Expect the repair to run $250 to $500 depending on the track’s condition and how many rollers are bad. Wind damage is rarely a one-time event in Burbank, so we document the repaired areas and note which hardware should be checked after the next major wind event. Call us at (424) 258-8818 and we’ll send a technician out.
Automatic gates in Burbank must meet UL 325 standards, which means they need an entrapment protection system: photo-eyes or other non-contact sensors that stop and reverse the gate if an object or person is in the path. Gates installed before these standards existed often have none at all, or have outdated contact edges that fail. We retrofit photo-cell pairs as part of almost every older operator service we do in Burbank. The retrofit is straightforward on most operators and is the single most important safety upgrade you can make to a legacy gate. We photograph the sensor installation and note it in the job record. Call (424) 258-8818 if you suspect your gate’s safety system is missing or not working.
Commercial gates near Burbank’s studio corridors on Olive Avenue and Pass Avenue run thousands of cycles per week, far beyond residential duty ratings. The hinge pins, rack-and-pinion gears, and operator components wear out in months, not years. For a gate running at that cycle rate, we recommend inspection every 30 days and hinge lubrication and tension checks every 45 to 60 days. The failure mode changes: you won’t feel a loose hinge, you’ll snap a gear tooth at 10 p.m. on a Friday. We select commercial-rated components and document the cycle-rate assumptions in every service record so the next technician knows what he’s working with. Call (424) 258-8818 to set a schedule.
Most sagging gates in Burbank can be fixed without replacing the post. The first step is checking whether the gate is sagging on its hinges, meaning the hinge pins are worn or the gate frame is bent, or whether the post itself has shifted out of plumb. We rebuild hinges and realign gates on Burbank ranch homes regularly, typically for $350 to $700. If the post is still solid in the ground and the concrete is intact, the hinges are the fix. If the post has moved or the footing is cracked, we’ll show you photos of the movement and give you a written price for the repair before we dig. Call (424) 258-8818 for an exact quote; estimates are free.
Written by Adrian Vance, Owner at Vance Gate Repair Tarzana.