Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Installation in Tarzana, CA: What It Costs and What to Expect
Gate installation in Tarzana typically runs between $2,800 and $9,500 for a residential driveway gate, with most single swing gates landing in the $3,500 to $5,500 range including the motor and basic access controls. A pedestrian gate costs less, usually $900 to $2,400 installed, while a full double gate or custom steel design can push past $12,000. Vance Gate Repair Tarzana hands you a written price before any work starts, so the number you approve is the number you pay. Call (424) 258-8818 for a free on-site estimate.
We’ve installed and repaired over 22,000 gates since Adrian Vance started the company in 2014, and every single job left with a documented photo record. That habit came from commercial access-control work, where a gate that fails an inspection is a gate that gets shut down. Residential customers get the same treatment: wiring diagrams, limit-switch readings, and photos of every connection we touched. When a technician leaves your property after Gate Installation in Tarzana, you’ll know exactly what was installed and why.
Trusted Gate Installation for Tarzana Homeowners
Most Tarzana homes on the flats south of Ventura Boulevard were built between the 1950s and 1970s, and their original driveway openings were sized for one car and maybe a swing set, not the wider gates today’s owners want. We see it constantly: a homeowner buys an SUV, realizes the old opening is too narrow, and suddenly needs a wider gate and a relocated post. Or a house off Reseda Boulevard gets a new tenant and the owner wants a security gate before the lease is signed.
That’s where we come in. Vance Gate Repair Tarzana installs driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates across the 91356 and 91335 zip codes. We’re the company that prices in writing before anyone picks up a tool, leaves a photo log when the job is done, and backs the work with a 365-Day Done Right Promise. If the install isn’t right within a full year, we fix it at no charge. No argument, no fee, no fine print.
Need someone out this week? Call (424) 258-8818. A live person answers 24/7. You won’t get a voicemail loop or a callback queue.
Key Takeaways
- Most Tarzana driveway gate installations cost $3,500 to $5,500 for a single swing gate with motor and keypad.
- Every job gets a written price before work begins, not a verbal estimate and a surprise invoice.
- We install gates on the brands you already know, including LiftMaster, DoorKing, Elite, and Mighty Mule motors.
- A live person answers the phone 24/7 at (424) 258-8818.
- Every installation includes a documented photo record of what was installed, how it was wired, and how it was tested.
What Our Gate Installation Service Includes
Every installation starts with a site walk. We measure the opening, check the soil condition at the post locations, look at the existing electrical, and figure out whether the ground slopes in a way that affects gate travel. Then we write the scope, hand you a flat price, and schedule the work. Here’s what each type of installation involves.
Driveway Gate
A Driveway Gate is the most common installation we do in Tarzana, and it’s usually a swing gate mounted on steel posts set in concrete. The motor, the photo-eye safety sensors, the keypad or remote receiver, and the battery backup all go in as part of the same job. We pull the permit if one is required, run the low-voltage conduit under the driveway, and leave you with a written wiring diagram so any future tech can see exactly how the system was built.
Pedestrian Gate
A Pedestrian Gate is the separate walk-through gate beside or within a larger driveway gate, and it gets used far more than the vehicle gate, which means it fails faster if it’s built cheaply. We hang it on a steel frame, install a dedicated latch and lock, and wire it to the same access system so one keypad or card reader controls both. For Tarzana homes on busy streets like Burbank Boulevard or Tampa Avenue, a pedestrian gate keeps foot traffic off the property without forcing you to open the big gate every time.
Sliding Gate
A sliding gate travels horizontally along a steel track instead of swinging out, which makes it the right choice when the driveway slopes up toward the house or when the setback is too short for a swing arc. We set the track on a concrete pad, install the cantilever or tracked carriage depending on the site, and program the motor’s travel limits so the gate stops gently without slamming. Most sliding gate installs in Tarzana run $4,800 to $8,500 depending on length and whether we need to pour a new pad.
Swing Gate
A swing gate is what it sounds like: a gate that pivots on hinges at the posts and opens inward or outward. Single swing gates handle one-car driveways; double swing gates split in the middle for two-car openings. We set the posts in concrete at least 36 inches deep, weld the hinge brackets to the post rather than burying them in the brick, and install the motor arm at the correct geometry so the gate doesn’t bind over time. In the Tarzana hills above Ventura Boulevard, we regularly run into decomposed granite soil that requires deeper footings and larger post bases.
Double Gate
A double gate is two gate leaves that meet in the middle, and it’s the standard solution when the driveway opening is 16 feet or wider. Both leaves need to travel at the same speed and close in the correct order, which means the limit switches and the sequencing have to be set precisely. We install a center drop pin or an electric lock so the inactive leaf stays put when the active leaf is moving, and we photograph the final settings so the next service call starts from documentation instead of guesswork.
Security Gate
A security gate is a driveway or pedestrian gate built with a heavier frame, tamper-resistant hinges, and typically an access control system with a card reader, keypad, or telephone entry unit. In Tarzana, we’re seeing more homeowners add security gates after a break-in or after buying a property on a street with high visibility from the boulevard. We build these with 12-gauge steel or heavier, set the posts below the frost line and into reinforced concrete, and integrate the gate with whatever access system you already have or want installed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterBrands We Service for Gate Installation
We install and service the motors on nine major gate-automation brands, and we don’t steer you toward a replacement just because a particular brand is what we carry. If you already have a LiftMaster operator on the property, we’ll install a new gate around it and re-use the motor if it’s in good working order. LiftMaster is the most common brand we see in Tarzana because so many local builders spec it, and we’ve installed hundreds of them on everything from single swing gates to heavy sliding gates with battery backup.
DoorKing is another brand we know well, especially on multi-family complexes and condo buildings in the Valley where the access system ties into a telephone entry unit. We’ve also done many installs with Mighty Mule and Elite operators, which are often the right choice for homeowners on a tighter budget who still want a reliable automatic gate. Whether you have one of those brands or any other make, we can install the gate, wire the motor, and leave you with a documented record of exactly what was done.
Signs You Need Gate Installation Right Now
- The gate is rusted through at the hinge or the pickets are separating from the frame. A gate that’s structurally failing isn’t a repair, it’s a liability. In Tarzana’s marine-influenced climate, unpainted steel rusts from the inside out, and by the time you see holes, the frame is too far gone to weld safely. It’s time for a new gate.
- You bought a car or RV that doesn’t fit through the existing opening. We hear this constantly from Tarzana homeowners who upgraded to a full-size pickup or added a boat trailer. The old driveway opening was built for a 1995 Camry. A new, wider gate with an automatic operator is the one fix that actually solves the problem.
- You want a working security barrier, not just a decorative one. A lightweight aluminum gate with no lock and no motor isn’t a security feature. If you’re installing a gate because you want to keep people off the property, it needs to be built like a barrier: steel frame, tamper-resistant hardware, and an access control system that records who comes and goes.
- The existing motor has been repaired twice in the last year and you’re tired of the recurring cost. There’s a point where patching an old motor and a sagging gate stops making financial sense. A new installation with a new motor, new posts, and a written warranty is often cheaper in the long run than another repair call. We’ll tell you honestly if that’s where you are.
- You’re renovating the house or redoing the front landscaping. The best time to install a gate is during a remodel, when the driveway is already torn up and the electrician is already on-site. We coordinate with general contractors in Tarzana regularly, and we’ll pull the gate permit and schedule the install to match the project timeline.
Our Gate Installation Process - Step by Step
- 1
The site walk and written estimate. A technician comes to your Tarzana property, measures the opening, checks the electrical panel, tests the soil at the post locations, and writes down exactly what the job requires. You get a flat price on paper before you make any commitment. If you already have a written estimate from another company, bring it and we’ll review it at no cost, which is a free second opinion under The Haven Standard.
- 2
Permit and material ordering. If the City of Los Angeles requires a permit for the gate installation, we handle the paperwork. We order the gate, the motor, the access controls, and the post steel, and we confirm the lead time with you before scheduling the work. For custom gates, we’ll send you drawings for approval before fabrication starts.
- 3
Post setting and gate hanging. We excavate the post holes, set the steel posts in concrete, and come back after the concrete has cured to hang the gate. The hinge geometry matters, and we set it carefully because a gate that’s hung two degrees off will sag or bind within months. Whether we’re working in the sandy loam near the Tarzana Recreation Center or the rocky ground up in the hills, we set the footings to the soil, not to a one-size-fits-all spec.
- 4
Motor, wiring, and safety programming. We mount the operator, run the low-voltage wiring, install the photo-eye sensors, and program the travel limits, the soft-close, and the obstruction detection. We test it with actual obstructions, not just with a multimeter. Every setting is recorded. You get a wiring diagram and a photo log showing the final configuration of every connection.
- 5
Walkthrough and documentation handoff. Before we leave, we walk the gate with you, test it open and closed, and show you how the keypad, remotes, and any app controls work. You get the written record. The 365-Day Done Right Promise applies from the date we finish, and if anything isn’t right within that year, we come back and fix it at no charge.
How Much Does Gate Installation Cost in Tarzana?
A single swing gate with an automatic opener in Tarzana typically runs $3,500 to $5,500, and you can see full Gate Installation pricing breakdowns on our cost page. A sliding gate usually lands between $4,800 and $8,500 because the track and pad add material and labor. A double swing gate runs $5,000 to $9,500 depending on width and motor capacity. Custom steel gates with decorative elements or pedestrian inserts push toward $10,000 and above.
Here’s what affects the price:
- Gate width and material weight. A 10-foot steel gate costs less than a 16-foot steel gate. A 16-foot aluminum gate costs less than a 16-foot steel one. Simple.
- Motor brand and capacity. A heavy double gate needs a larger operator than a light single gate. Whether that’s a LiftMaster, DoorKing, or Mighty Mule unit depends on the gate size and cycle frequency.
- Electrical work. If the gate location has no power nearby, the electrician has to run new conduit and a new circuit. That can add $400 to $1,500 depending on the trench length and whether it goes under concrete.
- Access control add-ons. A basic keypad runs $150 to $400 installed. A telephone entry system that calls your cell phone runs $1,200 to $2,500. Card readers and app-based controls add cost depending on the system.
- Soil and site conditions. In the Tarzana hills, rocky soil or steep grades can require deeper footings, taller posts, or a sliding gate instead of a swing gate. We’ll tell you what the site needs before you spend anything on materials.
How to avoid overpaying: get a written scope, not a verbal ballpark. A verbal number doesn’t protect you. The Haven Standard Clause 1 exists for exactly this reason, the written price is the entire point. If a contractor won’t put the price on paper before you commit, walk away. Our free estimate includes a line-item breakdown: gate, motor, hardware, electrical, permit, labor. You’ll see every dollar before it’s spent.
Call (424) 258-8818 for an exact quote on your Tarzana gate installation. Estimates are free.
Gate Installation Near Tarzana - Our Service Area
We install gates throughout the San Fernando Valley, including gate installation in Reseda, gate installation in Encino, Canoga Park, Northridge, West Hills, Sherman Oaks, Van Nuys, Chatsworth, Studio City, North Hollywood, and San Fernando. Our technicians are dispatched from our Tarzana base, so most homes in the immediate area can get a site visit within one to two business days. For a free estimate on gate installation in Tarzana or any surrounding neighborhood, call us.
Serving Tarzana, CA - Our Local Coverage Area
We’re based in the Tarzana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Installation in Tarzana
Gate installation is the process of setting the posts, hanging the gate, mounting the motor, running the wiring, and programming the safety and access controls so the gate opens and closes automatically and safely. It includes the concrete work, the electrical connection, the photo-eye sensors, and the remotes or keypads. In Tarzana, we handle the full job from the first site measurement to the final walkthrough.
A standard single swing gate with an automatic opener takes two to three days from start to finish: one day to set the posts in concrete, one to two days of cure time depending on the mix, and one day to hang the gate, install the motor, and program everything. Custom gates add lead time for fabrication, usually two to four weeks. We’ll give you a schedule in writing before the job starts.
Most Tarzana gate installations cost between $3,500 and $9,500 depending on the gate type, width, motor, and access controls. A single swing gate is the most affordable option. A double sliding gate with a telephone entry system is the most expensive standard configuration. You’ll get a written, line-item price before any work begins, so there’s no surprise at the end. Call (424) 258-8818 for a free estimate.
Yes. We install and service LiftMaster operators regularly, and we have the programming tools and OEM parts for the full LiftMaster line. If you already have a LiftMaster motor on the property and it’s in good condition, we can build a new gate around it and integrate it with the existing remotes and keypad. We also work on DoorKing, Elite, Mighty Mule, FAAC, BFT, Linear, Viking, and Ghost Controls.
Gate installation is scheduled work because the concrete needs time to cure, but if your gate has failed and you need temporary security, we can often board the opening or install a temporary chain and lock same-day in Tarzana. Call (424) 258-8818 and a live person will get a technician on the phone with you right away, 24/7.
Every gate installation is covered by the 365-Day Done Right Promise: if the installation isn’t right within a full year, we fix it at no charge. No argument, no fee, no expiration date within that window. Gate manufacturers also offer their own warranties on motors and control boards, and we’ll register your products so the coverage is active.
Clear the driveway and the area around both post locations so we have a few feet of working room. If you have pets, keep them inside on the day of the install. We’ll handle the utility markout, the permit, and any electrical coordination with your panel. If a fence or landscaping is tied into the existing gate area, let us know at the estimate and we’ll work around it or adjust the scope.
Schedule Your Gate Installation Service in Tarzana Today
Whether you’re replacing a rusted-out gate, widening an old opening, or building a security barrier from scratch, we’ll give you a written price before any work starts and a documented photo record when the job is done. Call (424) 258-8818 for a free, no-obligation estimate. A live person answers 24/7. See our home page for more on what we do.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Tarzana since 2014.