Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across North Hollywood
If you’re searching for Gate Repair in North Hollywood, the short answer is this: most swing-gate motor replacements run $480-$850, hinge and post repairs typically cost $225-$600, and a full gate realignment on a settled NoHo apartment slide gate usually lands between $350 and $700. We dispatch background-checked, uniformed technicians to North Hollywood every weekday, and a live person answers the phone 24/7 at (424) 258-8818. The longer answer, the one that actually saves you money, is down below.
North Hollywood isn’t like Burbank or Studio City when it comes to gate failures. The Valley floor heat, the post-Northridge concrete, the decades-old apartment gates that landlords inherited rather than installed. We know the difference, and we write the price down before anyone picks up a wrench.
Why Vance Gate Repair Tarzana Is North Hollywood’s Preferred Gate Repair Company
Our customers in North Hollywood tend to call after they’ve already read the three-star reviews on the last company. They want the price visible, the tech named, and evidence the job was done right. That’s how Adrian Vance has run things since 2014, when he moved from commercial access-control documentation into residential gate work across Los Angeles. Every North Hollywood job gets a written scope, a written flat price, and a photo record before the technician leaves.
We service nine automation brands, including Viking, Ghost Controls, and LiftMaster, so we don’t steer you toward a motor replacement just because it’s easier for the crew. The 365-Day Done Right Promise applies to every repair we complete in North Hollywood, from a misaligned photo-eye on a Burbank Boulevard complex to a seized slide gate off Vineland Avenue.
Response time to North Hollywood is typically same-day for emergency calls placed before early afternoon. A live person answers the phone at (424) 258-8818. No voicemail loop, no callback queue, no automated attendant.
Our Gate Repair Services in North Hollywood
Electric Gate Repair
When a North Hollywood homeowner says the gate is dead, they usually mean one of three things: the control board gave out, a limit switch walked, or a wire connection cooked inside its insulation. Valley heat accelerates all three. A 1980s-era control board that would limp along in Santa Monica often fails outright after a few 110-degree North Hollywood afternoons. We trace the circuit, name the failed component, photograph the reading, and quote a flat price before we replace anything.
Automatic Gate Repair
Automatic gates in North Hollywood’s mid-century apartment complexes often run on operators that were undersized from the start. The gate weighs more than the manufacturer rated the motor for, and thirty years of heat cycling makes it worse. On a 1970s complex near the NoHo Arts District, we found a Legacy LiftMaster operator still trying to move a thermally bound slide gate while the concrete channel cracked underneath it. Automatic gate repair here isn’t just swapping the motor. It’s checking why the motor was overloading in the first place.
Hinge & Post Repair
Swing gates across North Hollywood hang on posts that have been in the ground since the Eisenhower administration. Ground settlement, post-Northridge micro-shifting, and repeated Santa Ana wind loading pull posts out of plumb. When a hinge post leans even 3/8 inch, the gate sags, the latch binds, and the operator gears strip trying to push a gate that no longer lines up. We repair hinge posts by resetting and reseating them, and we leave a photo of the post before and after. Clause 4 of the Haven Standard: evidence on every job.
Gate Realignment
If your North Hollywood slide gate scrapes the track, stops halfway, or leaves a fresh gouge in the concrete, the frame has moved. On Valley floor properties, the concrete channel itself often has a longitudinal crack, visible when the gate is pulled off the track. That crack comes from heat expansion cycling and post-1994 settling. A realignment that ignores the cracked channel is a temporary fix. We grind and re-channel when the concrete has failed, then set the gate square and photograph the final alignment.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in North Hollywood
We repair operators from nine major automation brands, and on most North Hollywood jobs we’re servicing the motor that’s already bolted to the property: Viking and Ghost Controls on newer systems, DoorKing and LiftMaster on older installs, and Elite on light commercial gates. We stock common consumables, photo-eye lenses, limit switches, and capacitor kits for these brands in our Los Angeles parts inventory, so a typical North Hollywood repair doesn’t sit idle waiting on a two-week order. If the motor on your gate isn’t worth saving, we’ll say so and hand you a written replacement price. If it is worth saving, we’ll tell you that too, and we’ll show you the evidence.
Common Gate Repair Problems We See in North Hollywood Homes
- Thermally bound slide gates. In July and August, a dark-painted metal gate in direct Valley sun expands enough to bind in its track. The operator keeps trying to move it until the thermal overload trips, or the gears give out. The fix starts with realigning the gate for thermal expansion, not just resetting the breaker.
- Cracked concrete channel tracks. North Hollywood’s location roughly five miles from the Reseda-centered 1994 Northridge epicenter left thousands of older slide gates on concrete channels with hairline cracks. Three decades of heat cycling opened those cracks. The gate now sits lower on one side, drags the wheel, and overloads the motor.
- Worn hinge posts on post-WWII bungalows. The 1945-1970s single-family homes across North Hollywood were built with light gate posts and heavy wrought iron gates hung on them. Decades of use and a few wind events later, the post leans. The gate sags. The latch no longer catches. A new operator won’t fix a leaning post.
- Obsolete control boards that can’t support safety photocells. Many 1980s-2000s apartment gate operators in North Hollywood predate modern entrapment sensors. The board won’t accept the wiring. Rather than disable a safety device, the right move is retrofitting a compatible external receiver or replacing the board, and we’ll give you the written price for each option.
Pricing for Gate Repair in North Hollywood, CA
Let’s put numbers on it. A gate realignment in North Hollywood typically runs $350-$700, depending on whether the concrete channel needs regrinding. Hinge and post repair runs $225-$600 per post, including reseating and structural anchoring where needed. Electric gate repair on a control board or limit switch typically lands between $180 and $450. A swing gate motor replacement runs $480-$850, depending on the brand, horsepower, and whether the arm bracket is intact. These are written flat prices, not hourly estimates that drift upward. The price is handed to you in writing before any work begins, and it’s the price you pay. We don’t leave a surprise invoice at the end, and we don’t charge extra for the photo record. Under Clause 1 of the Haven Standard, the written price is the foundation of every North Hollywood job.
Call (424) 258-8818 for an exact quote on your gate. Estimates are free, and we’ll bring the camera.
We Also Serve Cities Near North Hollywood
Our crews work throughout the San Fernando Valley and the adjacent foothill communities. If you’re searching for North Hollywood gate service but live just over the line, we cover Studio City, Van Nuys, Burbank, and Sherman Oaks as well. Dispatch and scheduling are coordinated from the Los Angeles office; the technicians live and work across this part of the Valley.
Serving North Hollywood, CA - Our Local Coverage Area
We’re based in the North Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in North Hollywood
Your gate is thermally expanding. On a 105-degree Valley afternoon, a dark steel gate can grow enough along its length to bind against the steel wheels or the channel wall, tripping the operator’s obstruction sensor or thermal overload. The real fix is realigning the gate with proper thermal clearance and checking the channel for heat-related cracking. We set gates square with room to expand, then photograph the clearance so you can see the number. Call (424) 258-8818 for a written quote.
Usually, yes, but it depends on the board. Some 1980s and 1990s control boards have no input for external entrapment sensors, so the photocell can’t talk to the logic circuit. In those cases we install a retrofittable safety edge receiver or replace the board with a model that accepts both the photocell and the existing motor. We’ll price both options in writing before you choose. If a landlord in North Hollywood asks, yes: LA City housing codes expect property owners to maintain working gates on apartment complexes, and retrofitting safety devices is part of that.
Look at the reveal gap between the gate and the post at the top and bottom. If the gap is wider at the top on one side and tighter at the bottom, the post is leaning. If the gate itself is warped or bowed but the gaps at the hinges are even, the panel is the problem. On our North Hollywood calls, the post is usually the culprit, especially on pre-1970s homes and post-Northridge lots. We measure the plumb with a level, show you the reading, and repair accordingly.
Yes. LA City housing code requires rental properties to maintain gates and operators in safe working condition, and modern entrapment protection standards apply when the operator is replaced or substantially repaired. A pre-2000 gate that lacks photoelectric sensors or a reversing edge creates a liability for the property owner. When we repair or replace an operator on a North Hollywood apartment gate, we bring the safety devices up to current requirements and document what was installed. The photo log goes to the owner or property manager on the same visit.
Santa Ana winds carry fine dust and grit, and on North Hollywood properties they also push gates hard against their stops. The two together cause two common failures: grit in the loop detector’s termination points, and the gate moving far enough off axis to pull wires loose at the keypad or photo-eye. We find loose terminal connections and dust-packed sensor housings more often than actual board failures after wind events. We clean, reseat, re-terminate, and photograph the work.
What a Technician Actually Needs You to Know About a NoHo Gate
Most North Hollywood gate calls start with someone saying it just needs a new motor. Then we pull the gate off the track and find a cracked concrete channel, a hinge post out of plumb, and a control board older than the tenant in unit 3. The Valley’s heat doesn’t kill gates by itself. It kills the weak point, and on a North Hollywood gate there’s usually more than one. This page is our attempt to give you the information a gate specialist would give you before they visited: what fails, why it fails here specifically, what it costs, and what proof you should expect at the end. If you’re in North Hollywood and your gate is down, call (424) 258-8818. A live person answers. You’ll get a written flat price before any work starts, and a photo record when the technician leaves.
Written by Adrian Vance, Owner at Vance Gate Repair Tarzana, serving North Hollywood gate repair since 2014.
Gate Repair in Nearby Areas
