Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across North Hollywood
Gate installation in North Hollywood runs $2,400-$8,200 for most residential projects, with sliding gates at the higher end and pedestrian gates at the lower. We’re the crew North Hollywood landlords and homeowners call when a 1960s apartment gate has sagged past its track or a new operator needs to go on a driveway gate off Magnolia. If you’re searching for Gate Installation that won’t strip itself apart in the first Valley heat wave, call (424) 258-8818. We know what North Hollywood heat does to steel, concrete, and wire.
Why Vance Gate Repair Tarzana Is North Hollywood’s Preferred Gate Installation Company
North Hollywood isn’t Sherman Oaks. The gates here are older, heavier, and bolted to concrete that’s been shifting since the 1994 Northridge earthquake. The apartment complexes along Burbank Boulevard and Lankershim carry slide gates installed during 1980s crime-reduction retrofits, most of them on track channels that have developed longitudinal cracks from thirty years of thermal cycling. When you call our office, a live person answers. Not a voicemail loop. The technician dispatched to your address knows North Hollywood soil and NoHo’s heat island before they get out of the truck.
Every job we complete in North Hollywood includes a written price before work starts and a photo record of what we found, what we set, and what we left behind. That’s how our 365-Day Done Right Promise works: if it isn’t right, we make it right, no fee, no argument. Adrian Vance built this business on commercial access-control documentation starting in 2014, and North Hollywood apartment owners benefit from that same standard.
Our Gate Installation Services in North Hollywood
Driveway Gate
Driveway gate installation in North Hollywood usually means a swing or slide design across a front setback that’s tighter than anything you’ll find in Studio City. Many post-war bungalows along Oxnard Street and Morrison have narrow driveways where a swing gate’s arc would hit a parked car, so we lean on slide designs or set swing posts with the travel clearance mapped and documented. We quote the full scope: posts, gate frame, hinges or rollers, operator, safety sensors, and the concrete work under the track or posts.
Pedestrian Gate
For the walk gates that flank driveways and side paths, North Hollywood’s apartment buildings need something that survives 110-degree days and occasional Santa Ana gusts. We install galvanised steel pedestrian gates with stainless fixings as the default on any coastal-adjacent or heat-exposed property, and we size the post anchors for the gate weight. If it’s an access door that gets slammed by tenants, we install soft-close hardware and commercial-grade hinges rated for daily abuse.
Sliding Gate
Sliding gate installation is the service we do most in North Hollywood, because the majority of NoHo apartment complexes retrofitted with slide gates decades ago are now seeing those gates fail. Before we order a single operator, we inspect the concrete channel track. In this neighborhood, heat cycling and post-Northridge micro-settling crack those channels longitudinally, which binds the gate and strips rack and pinion gears. If the foundation under the track isn’t sound, no new motor will last. We handle the concrete grinding, re-channeling, and repouring before the new gate gets hung.
Swing Gate
Single and double swing gates work where the driveway is wide enough for the leaf arcs, which happens more often in the Arts District’s converted lofts and the single-family corridors south of Burbank Boulevard. On double gates, we align the paired leaves so the latch block seats without fighting, then set the operator’s opening and closing limits with both leaves photographed at full travel. Swing gate installations in North Hollywood include checking the hinge post depth and condition; sagging posts are common here due to ground movement, and a new gate on a settled post is a call-back waiting to happen.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in North Hollywood
We install and service operators from DoorKing, LiftMaster, FAAC, BFT, Viking, Ghost Controls, Elite, Linear, and Mighty Mule. If you’re repairing an existing gate rather than replacing it, we work on whatever motor is already on the property. For North Hollywood customers, we keep common Viking and Ghost Controls parts accessible for fast turnaround, though most installations are quoted and scheduled with the exact operator scheduled for delivery ahead of the work day. No one should be pressured into replacing a motor that can be rebuilt.
Common Gate Installation Problems We See in North Hollywood Homes
- Cracked concrete channel tracks. The floor of the San Fernando Valley heats and cools hard, and the 1994 Northridge quake’s epicenter was five miles away in Reseda. Decade-old slide gate channels crack longitudinally, binding the wheels and stripping drive gears. Track repair has to happen before operator work.
- Thermal overloads on undersized operators. North Hollywood routinely hits 105-112°F in summer, which is 15 to 20 degrees hotter than coastal LA. Motors that were never rated for that sustained heat seize mid-cycle and trip their thermal cutoffs. We spec the operator based on gate weight plus a heat margin for Valley conditions.
- Tubular steel frames bent by Santa Ana winds. Lightweight gate frames flex under lateral wind load, and over several seasons that bends the leading edge enough to foul the latch or the track. Retrofits here should use heavier-gauge steel or reinforcement gussets at the stress points.
- Sagging hinge posts from ground settlement. NoHo’s post-war soil shifts, especially near older apartment slabs. A gate that drags at the latch bolt usually means the post has moved, not the gate. We set posts in deeper footings with proper curing time before hanging anything on them.
Pricing for Gate Installation in North Hollywood, CA
A residential swing gate installation in North Hollywood typically runs $2,400-$4,800, depending on gate width and post condition. Sliding gates run $3,800-$8,200 because they include concrete track work, a heavier frame, and an operator sized for the rolling load. Pedestrian gates are the most affordable at $1,200-$3,000 installed with a magnetic latch and closer. Double driveway gates add $1,800-$3,500 over the single-leaf price due to paired operator synchronization and alignment. These are flat prices written before work starts. If your concrete channel track needs grinding and repouring, that’s a separate line item we quote after seeing the crack condition in person. Call (424) 258-8818 for a free measure and written estimate.
What affects the price on a North Hollywood gate install?
- Track or post foundation repair: cracked channels add $850-$2,200 depending on linear footage and depth.
- Gate material: galvanised steel with stainless fixings costs more upfront than painted tubular steel, but it’s the spec that survives Valley UV and heat without rust blooms at the welds within three years.
- Operator brand and capacity: Viking, FAAC, and DoorKing all price differently, and we don’t push the most expensive unless the gate weight calls for it.
- Access and site prep: if we’re pulling an old gate off a 1960s apartment track, the demo and haul-off is a visible line item.
We Also Serve Cities Near North Hollywood
Vance Gate Repair Tarzana serves North Hollywood and the surrounding communities, including Studio City, Van Nuys, Burbank, and Sherman Oaks. Call (424) 258-8818 and a live person will answer, any hour, any day. We’ll let you know if your area falls within our normal dispatch zone and get a written price to you before scheduling.
Serving North Hollywood, CA - Our Local Coverage Area
We’re based in the North Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in North Hollywood
Your gate binds more in summer because the concrete channel track expands at a different rate than the steel gate riding on it, and any existing longitudinal crack widens when the temperature climbs to 105°F or higher. The gate wheel drops into the widened crack, the frame twists, and the rack gear strips against the pinion. A summer binding gate usually means the track needs grinding and re-channeling, not just operator adjustment. Call (424) 258-8818 for an inspection with a written finding and price.
For most North Hollywood properties, yes. Galvanised steel with stainless fixings is the specification that actually holds up in this extreme heat island. Painted tubular steel looks fine for two or three years, then the UV and thermal cycling crack the powder coat at the weld points and rust starts within the frame. Galvanised costs more at installation but it doesn’t rot from the inside out the way painted mild steel does in NoHo conditions.
Yes, and North Hollywood’s sun exposure makes solar a reasonable option on single-family driveway gates where running conduit would mean tearing up a long run of concrete. The panel needs direct sun for most of the day, so check for tree canopies along the east and west sides of your lot. For gates used more than 15 cycles a day, we recommend a hybrid setup with a battery bank and a smaller panel, or a hardwired operator. We’ll give you a written quote either way before any work begins.
Yes, and any company that bolts a new operator onto a cracked track is setting you up for a stripped gearbox within months. In North Hollywood, cracked concrete channels are common on 1960s to 1980s apartment slide gates because of the combined heat cycling and post-Northridge ground settling. We grind the old channel, repour the substrate, and set the new track level before mounting the operator. The foundation work is quoted as a separate line item, in writing, before we start. Call (424) 258-8818 for a free evaluation.
Your gate meets UL 325 when it has a functioning photo-eye or contact edge that reverses the gate when something crosses its path or touches the leading edge, and the operator’s force settings are tested and measured at installation. On every North Hollywood install, we photograph the sensor alignment, test the reversal loops, and document the force settings in the written record we leave with you. UL 325 compliance isn’t optional, and it shouldn’t be something you have to ask for.
Written by Adrian Vance, Owner at Vance Gate Repair Tarzana, serving North Hollywood since 2014.
Contact Vance Gate Repair Tarzana for Gate Installation in North Hollywood
Call (424) 258-8818 for a free estimate on your North Hollywood gate installation. A live person answers, any hour, any day. We’ll set a time to measure your gate, look at the track or posts, and hand you a written price before any tool comes off the truck. No phone tag, no surprise invoice, no work without paperwork. If you already have a written estimate from another gate company, bring it in. We’ll review it at no charge and give you our number in writing. That’s the Haven Standard, every visit, every job.
Gate Installation in Nearby Areas
