Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFAAC Hinge & Roller Replacement: The Tarzana Owner’s Guide
We stock and install FAAC-compatible hinge and roller replacements throughout Tarzana, with most jobs priced between $285 and $490 installed, parts and labor included. Same-day service is available when we have the correct hinge or roller set on the truck for your specific FAAC model. Owners usually discover the problem the same way: the gate starts dragging on one corner, the hinge pin has visible side play, or the roller wheel has worn flat and the gate sounds like it’s grinding against the track instead of riding it.
FAAC hinges and rollers are not generic hardware. The hinge spacing, roller diameter, and mounting pattern vary between the FAAC 400, 390, and 750 series operators, and putting an off-the-shelf roller from a fence supplier on a FAAC track shortens the next replacement cycle considerably. We match the part to the gate, not the other way around.
Which FAAC Models This Applies To
FAAC residential slide gates and swing gates in Tarzana fall into a few series lines we see regularly: the 390 and 400 series for residential slide operators, the 750 and 770 series for heavier slide applications, and the S800H and Swing series for articulated-arm swing gates. Each uses a different hinge and roller geometry. A roller that fits a FAAC 390 track will not sit correctly on a 750 track, even if the bolt hole lines up, because the rail profile and the roller shoulder depth are not the same.
The fastest way to identify what you need is to photograph the roller and hinge from two angles with a ruler in frame. We ask for those photos before dispatch so the technician arrives with the correct part in hand, not a guess. On the OEM-versus-aftermarket question: FAAC factory rollers are well built, but several aftermarket suppliers now produce rollers with sealed bearings that outlast the original part in Tarzana’s dry heat. We carry both and quote both, with the price difference explained in writing before we touch anything.
Signs Your FAAC Hinge & Roller Replacement Is Failing
- The gate stutters or jerks halfway through travel. This is usually a flat-spotted roller or a hinge pin worn oval, which makes the leaf catch at the same point in the cycle every time.
- You hear a metal-on-metal groan near the track. In Tarzana’s dust, roller bearings dry out and the wheel stops turning, so the gate slides across the roller instead of rolling on it. That sound is the roller being ground down.
- The gate leaf drops or sags at the free end. Worn hinge bushings allow the leaf to settle, which throws off the photobeam alignment and makes the operator work harder on every cycle.
- The gate scrapes the driveway or the track cover. Once the roller diameter wears down, the bottom rail touches surfaces it was never supposed to contact. You’ll see fresh scrape marks on the concrete.
- The motor runs but the gate barely moves. A seized roller or collapsed hinge adds enough drag that the FAAC control board reads it as an obstruction and stops the motor entirely.
BeforeAfterReplacement Cost & What’s Included
In Tarzana, we quote FAAC hinge and roller replacement as a flat installed price before any work begins. Typical single-roller replacement runs $120 to $195 installed. A full hinge set on a single-leaf swing gate runs $225 to $350. Replacing all rollers on a slide gate, including track alignment, runs $285 to $490 depending on the gate weight and whether the track itself needs shimming. We don’t charge an hourly rate on this repair, so the number you approve is the number you pay, even if the job takes an extra half hour because the track settled over the years.
Every replacement includes the part, the labor, track or leaf alignment after the install, a photo log of what came off and what went on, and the 365-Day Done Right Promise: if the new hinge or roller doesn’t perform correctly within a year, we make it right at no charge. That’s the Haven Standard, and it’s been our rule on every job in the San Fernando Valley since Adrian Vance started the company in 2014.
DIY or Call Us?
If you want to check a roller, you can look for visible flat spots and wiggle the gate by hand to feel for side play at the hinge, that’s safe enough. But replacing a FAAC hinge on a loaded gate is not a hand-tool job. The gate leaf weighs hundreds of pounds, and when the hinge pin comes out, that weight has to be supported and leveled. A gate that drops during the job can injure whoever is under it, and a slide gate roller replacement means working near the rack and pinion with the operator powered down. This is the kind of work where the correct blocking, the correct pin size, and a second person are not optional.
We’d rather you call us. The estimate is free, the price is fixed before we start, and you get a documented record of the part number we installed, so you’re never guessing again.
FAQs
In Tarzana’s climate, you can reasonably expect 7 to 12 years from an OEM FAAC roller and about 10 to 15 from a well-chosen sealed-bearing aftermarket replacement, depending on gate weight, cycle count, and whether the track stays clean of landscape debris and irrigation runoff. Irrigation overspray near the track rusts roller bearings and hinge pins much faster than dry heat alone. If your gate cycles more than 40 times a day, expect the shorter end of that range. Call (424) 258-8818 if you want us to inspect your specific gate; the inspection is free.
Generally no. The bearing is sealed inside the wheel, and once the roller has flat-spotted or the bearing lets the wheel wobble, rebuilding the old part costs more than the replacement and doesn’t last. Some hinge pins can be replaced separately from the hinge body, which is worth doing if the hinge plates are still true. We’ll tell you which situation you have before recommending anything. Call (424) 258-8818 and we’ll give you a straight answer over the phone with a free estimate.
A single roller replacement on a slide gate typically takes 45 minutes to an hour once the gate is blocked and powered down. A full hinge set on a heavy swing gate takes two to three hours, including leaf realignment and photobeam repositioning. We keep common FAAC roller sizes on the truck, so most Tarzana jobs are completed same-day. Call (424) 258-8818 and we’ll tell you honestly if your model is one we can fix on the same visit.
Yes, we carry the most common FAAC slide-gate roller sizes and hinge pin kits on our trucks, plus compatible aftermarket options for the 390, 400, and 750 series, because those are the models we see most often in Tarzana. The less common articulated-arm hinges for S800H swing gates are usually stocked at our local supplier and available next day. When you send us the photos before the visit, we confirm which part we’re bringing so you’re not waiting on a part order unless it’s genuinely rare. We also stock parts for LiftMaster, Mighty Mule, and Ghost Controls gates, but FAAC is one we see constantly along Reseda Boulevard and the surrounding neighborhoods. Call (424) 258-8818 with your model number and we’ll confirm stock before you wait.
Written by Adrian Vance, Owner, Vance Gate Repair Tarzana at Vance Gate Repair Tarzana, serving Tarzana and nearby areas.