Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Santa Monica, CA
Gate access control in Santa Monica usually means a keypad, intercom, or phone-entry system that has failed after a few years of salt air. The neighborhoods between the ocean and 26th Street, especially north of Montana, run more automated gates than almost anywhere else in Los Angeles, and those systems corrode fast. We repair, replace, and upgrade entry systems on gates that sit within a mile of the Pacific. Call (424) 258-8818 when a keypad stops reading codes or a phone-entry box stops ringing.
Why Santa Monica Homes Are Different
Santa Monica’s marine layer deposits salt moisture on exposed metal every morning, roughly 300 days a year. A steel gate hinge that lasts 15 years in Pasadena fails in about 8 years here. The 1920s-to-1950s bungalows in Sunset Park and Ocean Park often have narrow driveway gates and small pedestrian gates with hardware from three different decades. North of Montana, the gates are bigger, heavier, and automated, usually custom wrought iron or powder-coated steel. These gates carry ornate hinges, mag locks, and keypads that all fail on different schedules. We photograph every repair because the next technician will need to know what the last one found. Santa Monica’s salt air punishes mystery repairs. Written records matter here more than in most cities.
Our Main Santa Monica Services
Santa Monica homeowners call us about three things most often: a gate that won’t move, an operator that stopped responding, and a brand-new gate that needs to be installed correctly the first time. Each has its own page below.
Gate Repair in Santa Monica
Most gate repairs in Santa Monica come down to rusted hinges, sagging frames, or a latch that no longer aligns. In Ocean Park and Sunset Park, we see a lot of 1950s gates with original hardware that was never designed for salt exposure. We replace hinges with marine-grade stainless, repair or rebuild the frame, and adjust the catch so the gate closes cleanly. Full detail is on the Gate Repair in Santa Monica page.
Gate Installation in Santa Monica
New gate installation in Santa Monica needs to start with the right material for the location. A block from the beach is not the same environment as 20 blocks inland. We install steel, aluminum, and wood gates, hang them square, and make sure the hardware will hold up. See the Gate Installation in Santa Monica page for specifics.
Gate Motor & Opener in Santa Monica
Salt air is hardest on automated operators. Circuit boards corrode, motor housings seize, and limit switches drift. In north-of-Montana homes, we regularly find LiftMaster and DoorKing units less than five years old with corroded boards. Marine-grade sealed operators are the honest recommendation this close to the water. Details are on the Gate Motor & Opener in Santa Monica page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Santa Monica
Gate access control in Santa Monica fails faster than anywhere else we work because keypads, card readers, and intercoms all have circuit boards, and circuit boards do not like salt moisture. We regularly open a keypad housing near the beach and find green corrosion across the contacts. Gate Access Control work here means diagnosing what failed, replacing it with a sealed or weather-rated part, and leaving a photo record of the wiring so the next repair is faster.
Keypad Entry
Signs you need it
The keypad accepts a code but the gate won’t open, or some buttons stop responding entirely.
What it costs in Santa Monica
Replacing a keypad in Santa Monica typically runs $250 to $650 installed, depending on whether it’s a surface-mount model or flush-mount with new wiring.
How we do it
We open the housing, photograph the corrosion or failed contacts, replace the keypad with a sealed unit, and reprogram all existing codes before we leave.
Phone Entry
Signs you need it
A visitor calls the house from the entry box and the gate doesn’t buzz open, or the box rings constantly with no one there.
What it costs in Santa Monica
Phone-entry system repair in Santa Monica ranges from $300 to $700 depending on whether the problem is the board, the phone line, or the relay.
How we do it
We test the relay, trace the wiring from the entry box to the control board, replace the failed component, and photograph the final connections.
What Gate Access Control Costs in Santa Monica
| Item | Typical range in Santa Monica |
|---|---|
| Keypad replacement | $250 - $650 |
| Phone entry repair | $300 - $700 |
| Card reader installation | $400 - $900 |
Can you replace a corroded keypad the same day?
Usually yes. We stock common keypad brands and can often get the gate working the same day. Call (424) 258-8818 with the brand name if you know it.
Do you work on intercoms near the beach?
Yes, and the beach is why we recommend sealed units. A standard intercom will fail again in a few seasons. Call (424) 258-8818 for a written estimate.
Gate Parts & Welding in Santa Monica
Wrought-iron and steel gates in Santa Monica rust through at the hinges, and when a hinge tears off, welding is the repair. The older homes in Sunset Park and Ocean Park have gates that were installed decades ago with hardware that no one makes anymore. Gate Parts & Welding is about making those gates work again instead of replacing them wholesale.
Hinge Replacement
Signs you need it
The gate sags, scrapes the ground, or the hinge has visible rust and cracks around the weld points.
What it costs in Santa Monica
Replacing two wrought-iron hinges in Santa Monica runs $180 to $400 per pair, more if the post needs grinding and reinforcement.
How we do it
We cut off the old hinge, grind the surface clean, weld the new stainless hinge into position, and coat the work to slow future rust.
Rail Repair
Signs you need it
The gate’s middle rail is cracked, bowed, or separated from the frame, making the gate feel loose.
What it costs in Santa Monica
Rail repair in Santa Monica ranges from $250 to $550 depending on the length of the crack and whether we weld in a new section or patch the existing steel.
How we do it
We jig the gate square, grind out the crack, weld the repair, and apply a matched finish so the fix doesn’t look like an afterthought.
What Gate Parts & Welding Costs in Santa Monica
| Item | Typical range in Santa Monica |
|---|---|
| Hinge replacement (per pair) | $180 - $400 |
| Rail repair | $250 - $550 |
| Post replacement | $600 - $1,200 |
Can you weld a gate without removing it?
Often yes. Many hinges and rail cracks can be welded in place. If the post is rotted, the gate comes down. Call (424) 258-8818 for a written answer.
Do you replace just one hinge?
We can, but we recommend replacing the pair when one has failed. The second one usually isn’t far behind. The price is fixed before we start.
Brands We Service in Santa Monica
We carry parts for Viking, Ghost Controls, DoorKing, and Elite operators. These are the brands most common on Santa Monica gates. We keep common control boards, keypads, and remote kits in local stock. See our brands for the complete list of what we service.
Pricing for Gate Repair in Santa Monica, CA
| Service | Typical range in Santa Monica |
|---|---|
| Keypad replacement | $250 - $650 |
| Phone entry repair | $300 - $700 |
| Card reader installation | $400 - $900 |
| Hinge replacement (per pair) | $180 - $400 |
| Rail repair | $250 - $550 |
| Post replacement | $600 - $1,200 |
Salt air drives Santa Monica prices up slightly, mostly because the parts have to be sealed or marine-rated and because corroded hardware often takes longer to remove. Under Clause 1 of The Haven Standard, we hand you a written price before any work starts, and that number does not change.
Neighborhoods We Serve in Santa Monica
We work the whole city, from the beach up through Sunset Park and north to Montana Avenue. Most calls in Santa Monica get a same-day or next-day visit.
- Sunset Park
- Ocean Park
- North of Montana
- Mid-City Santa Monica
- Pico District
Service Area - Cities Near Santa Monica
We also take gate repair calls in Venice, CA, Beverly Hills, CA, West Hollywood, CA, and Sherman Oaks, CA. The coastal areas get the same marine-grade recommendations we make in Santa Monica.
Serving Santa Monica, CA - Our Local Coverage Area
We’re based in the Santa Monica area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Santa Monica
Most calls get a same-day or next-day visit. If the gate is stuck open or won’t close at all, we treat that as a priority. Call (424) 258-8818 and a live person answers.
Repair work almost never needs a permit. A full new installation sometimes does, depending on height and location. We can check while we’re quoting the job.
Yes. We work on pedestrian gates, driveway gates, and vehicle entrances for condos and small apartment buildings. Every job gets the same written price and photo record.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Santa Monica Customers Say
"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.