Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in West Hills, CA
Gate access control in West Hills usually means one of two jobs: replacing an intercom or keypad that survived the last Santa Ana wind season, or retrofitting an older swing gate so it stops relying on a dying remote receiver. Homes here were mostly built between the late 1950s and early 1980s, which means a lot of the automation wiring predates current low-voltage standards. If your gate won’t open from the street or the keypad stopped responding after the last wind event, call (424) 258-8818 and we’ll send a technician with a written price before any work starts.
Why West Hills Homes Are Different
West Hills sits in LA County’s Very High Fire Hazard Severity Zone, and that single fact shapes more gate work here than anything else. Since the Woolsey Fire in 2018, county inspectors reviewing rebuilds and permit applications have actively flagged combustible wood driveway gates as non-compliant. A call that starts as a wood gate repair often ends as a metal gate replacement, simply because the homeowner needs fire-code sign-off and doesn’t want to pay twice.
The other force at work is wind. Santa Ana events funnel through the Simi Hills corridor and into upper West Hills with enough force to bend gate frames, strip hinge welds, and throw automatic gates off their rollers. Fall and winter are predictably the busiest seasons for gate repair here, a pattern flatland communities a few miles east don’t experience. The ranch-style tract homes near the valley floor have block-wall perimeters and older swing or slide gates; the custom hillside properties closer to the Simi Hills border pair ornate wrought iron or tubular steel gates with Viking or Linear motors that are often past their service life.
Our Main West Hills Services
Most West Hills homeowners reach out to us for one of three reasons: a gate that stopped moving, a gate that needs to be replaced to satisfy fire-code requirements, or a motor that no longer responds. Each has its own page here with full pricing and local detail.
Gate Repair in West Hills
A bent frame after a 60 mph wind gust, a hinge weld that cracked, a gate thrown off its rollers. Repair work in West Hills skews heavily toward metal gates because of fire-code pressures, and we document every adjustment with photos before we leave. See the full breakdown at Gate Repair in West Hills.
Gate Installation in West Hills
When a wood gate gets flagged during a rebuild inspection, the smart move is usually a steel or aluminum replacement sized to the existing opening. We quote the full install in writing, including removal of the old gate and any track work. Details are on the Gate Installation in West Hills page.
Gate Motor & Opener in West Hills
Triple-digit summer heat accelerates motor burnout in the western Valley, and older Viking or Linear systems on hillside properties are common candidates for replacement rather than repair. We service nine automation brands so you aren’t steered into a new motor you don’t need. Learn more at Gate Motor & Opener in West Hills.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in West Hills
Gate access control in West Hills means the system that decides who gets in: keypads, remotes, phone entry, card readers, and video intercoms. The housing stock here runs from 1950s ranch tracts to 1980s hillside estates, so we regularly see everything from original hardwired intercoms to modern cellular-based phone entry, often with questionable splices from years of handyman repairs. When we open an access control job, we document the existing wiring before changing anything, because half the repair is undoing someone else’s improvisation. Our full service line is detailed at Gate Access Control.
Keypad Entry
Signs you need it
The keypad works intermittently, or some codes stopped working while others still function.
What it costs in West Hills
Most keypad replacements in West Hills run between $250 and $650, depending on whether it’s a standalone unit or tied into a larger access system.
How we do it
We test continuity at the keypad, replace or reprogram the unit, re-secure the housing, and leave a photo log of the new wiring and settings.
Phone Entry
Signs you need it
Callers can’t get through to the house phone, or the gate opens on its own when no call is being made.
What it costs in West Hills
Phone entry system repairs in West Hills typically range from $300 to $800, though cellular-based units cost more than landline models.
How we do it
We verify the phone line or cellular module, test the relay, reprogram the directory, and record the settings changes in a written log.
What Gate Access Control Costs in West Hills
| Item | Typical range in West Hills |
|---|---|
| Keypad replacement | $250 - $650 |
| Phone entry repair | $300 - $800 |
| Video intercom install/repair | $500 - $1,400 |
Can you fix my gate access system the same day I call?
In most cases, yes. Keypad and remote issues are usually resolved in a single visit. If a specific part has to be ordered for an older hillside system, we’ll tell you before we leave and give you a written price for the follow-up.
Do you work on existing access systems or only install new ones?
Most of our West Hills work is repair and retrofit of existing systems. We service DoorKing, Elite, LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, and Mighty Mule, so we fix what’s already on the property. Call (424) 258-8818 and we’ll give you a straight answer before any work is scheduled.
Gate Parts & Welding in West Hills
Gate parts and welding in West Hills usually means one of two scenarios: a Santa Ana wind event bent a steel gate frame or stripped a hinge weld, or a fire-code inspection flagged a wood gate and the homeowner needs structural metal work done right. Wrought iron and tubular steel gates take a beating in the Simi Hills corridor, and weld failures at hinges and post brackets are the most common calls we get from upper West Hills. Our full parts and welding line is at Gate Parts & Welding.
Hinge Replacement
Signs you need it
The gate sags visibly, scrapes the ground, or the hinge weld shows a crack.
What it costs in West Hills
Hinge replacements in West Hills typically run between $150 and $450 per hinge, depending on gate weight and whether welding is required.
How we do it
We brace the gate, cut or unbolt the old hinge, weld or bolt the replacement, and photograph the finished weld before we leave.
Gate Rollers
Signs you need it
The gate shudders while sliding, jumps the track, or the rollers look flattened or seized.
What it costs in West Hills
Roller replacement on a slide gate in West Hills generally runs between $120 and $380, including realigning the gate on its track.
How we do it
We lift the gate, replace the roller assembly, reset the track alignment, and test the full open-close cycle on site.
What Gate Parts & Welding Costs in West Hills
| Item | Typical range in West Hills |
|---|---|
| Hinge replacement (per hinge) | $150 - $450 |
| Roller replacement | $120 - $380 |
| Custom welding repair | $200 - $700 |
Can you weld a broken wrought iron gate back together on site?
Yes, and we do it regularly in West Hills. We bring a mobile welding setup, brace the gate, weld the break, and grind the joint clean. If the metal is too thin or rusted to hold a weld, we’ll tell you and quote a replacement section instead.
How much does it cost to replace a bent gate post in West Hills?
Post replacement typically runs between $300 and $900, depending on whether it’s set in concrete, attached to block wall, or needs welding for the hinge brackets. Call (424) 258-8818 and we’ll quote the exact number before anything gets dug up.
Brands We Service in West Hills
We work on DoorKing, Elite, Mighty Mule, and LiftMaster systems among others, and we keep common parts for those brands stocked in our Los Angeles office so most West Hills repairs aren’t delayed by shipping. Full details are on our brands page. If your motor still has a legible model number, we can usually tell you over the phone whether it’s worth repairing.
Pricing for Gate Repair in West Hills, CA
| Service | Typical range in West Hills |
|---|---|
| Keypad replacement | $250 - $650 |
| Phone entry repair | $300 - $800 |
| Video intercom install/repair | $500 - $1,400 |
| Hinge replacement (per hinge) | $150 - $450 |
| Roller replacement | $120 - $380 |
| Custom welding repair | $200 - $700 |
| Post replacement | $300 - $900 |
| Gate frame straightening | $250 - $800 |
What pushes a price up in West Hills is usually the condition of what’s already there: rusted welds, improvised wiring from previous repairs, or a gate that’s been out of alignment long enough to wear its rollers unevenly. Every job gets a written price handed to you before any work starts, so the number you approve is the number you pay. That’s Clause 1 of the Haven Standard, and it applies on every visit without exception.
Neighborhoods We Serve in West Hills
We cover all of West Hills, from the flatland ranch tracts near Platt Avenue to the hillside estates along Roscoe and Victory where the wind is strongest. Typical response time is same-day for most repairs when called in before early afternoon.
- Upper West Hills near the Simi Hills border
- The ranch tract neighborhoods around Platt Avenue
- Homes along Roscoe Boulevard
- The Victory Boulevard corridor
- Bell Canyon Road area
Service Area - Cities Near West Hills
We serve West Hills and the surrounding west San Fernando Valley communities. If you’re in Canoga Park, CA, Chatsworth, CA, Reseda, CA, or Tarzana, CA, the same technicians and the same written-price policy apply. Dispatch is coordinated from our Los Angeles office.
Serving West Hills, CA - Our Local Coverage Area
We’re based in the West Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in West Hills
For a gate that won’t close or won’t open, we can usually have a technician at your West Hills property the same day when you call before early afternoon. A live person answers at (424) 258-8818 around the clock, so you’ll know your window before you hang up.
Most gate repairs don’t require a permit, but any rebuild or new gate installation in West Hills may be subject to LA County fire-code review because of the Very High Fire Hazard Severity Zone designation. We can tell you what applies to your specific project based on the gate material and the scope of work, before anything gets scheduled.
Yes, in most cases. LA County inspectors in the VHFHSZ have been flagging combustible wood driveway gates as non-compliant since the Woolsey Fire, and a steel or aluminum replacement is the standard fix. The gate itself is only part of the risk reduction, but it’s the part we handle, and we’ll document the material change for your permit file.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What West Hills Customers Say
"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.