Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Repair for Tarzana Homeowners
A gate that drags on the concrete, stops mid-travel, or refuses to latch is more than an annoyance. It’s a security hole in your perimeter. Most gate repair in Tarzana comes down to one of six things: a failing motor, a bent hinge, a misaligned track, a dead lock, a rusted weld, or a sensor that’s drifted out of position. We’ve fixed 22,000+ of them since 2014, and every single job starts with a written price before anyone touches a tool. Call (424) 258-8818 and a live person answers, 24 hours a day.
Our technicians arrive in uniforms, background-checked, with their name and photo sent to your phone before they pull into the driveway. They service DoorKing, Elite, Mighty Mule, LiftMaster, and five other major automation brands. And before they leave, you get a photo log of every adjustment made and a written record of every part installed. No gate company in Tarzana documents their work like we do.
What Our Gate Repair Service Includes
Electric Gate Repair
Electric Gate Repair is needed when gates fail in predictable ways: a capacitor burns out, a limit switch drifts, a circuit board corrodes, or a power supply stops delivering clean voltage. When your gate opens halfway and reverses, or hums without moving, you’re looking at an electrical fault, not a mechanical one. We diagnose the exact component, show you what we found, and replace only what’s failed. Before we leave, you get a wiring diagram of what was changed and a photo of the new component installed.
Automatic Gate Repair
Automatic Gate Repair combines the mechanical hardware of a swing or slide gate with the control logic of the operator. The failure point is almost always in the interface between the two: an arm bracket sheared off, a gear stripped inside the operator, a receiver no longer talking to a remote. We carry OEM parts for the major automation brands, which means we can usually repair the operator you have rather than selling you a new one. In Tarzana, where many homes run DoorKing or Elite on the driveway, our vans stock common boards, arms, and capacitors for same-visit fixes.
Hinge & Post Repair
A steel gate hangs its entire weight on two or three hinges. When a hinge wears oval, the gate sags. When a post loosens in its footing, the sag gets worse every week until the latch misses the strike by a full inch. We replace worn hinge pins, cut out and weld in new hinge plates where the steel has torn, and reset posts that have shifted through our Hinge & Post Repair service. On the big wrought-iron gates common in Tarzana’s hillside neighborhoods, post repair often means digging the footing, re-plumbing the post, and re-setting it in fresh concrete. We bring the mixer, the epoxy, and the documentation.
Gate Realignment
Gate Realignment is the most under-diagnosed repair in the industry. A gate that scrapes the driveway may look like a structural problem, but in most cases it’s a matter of re-setting the hinge plane, adjusting the operator arm, or leveling the track on a slide gate. We use a laser level to check the post plumb and the gate plane, then we document the before and after readings. In Tarzana’s expansive soil, where dry summers and wet winters make posts move, realignment is a service we perform repeatedly for long-term customers.
Lock Repair
A gate lock does two jobs: it keep people out when the gate is closed, and it also anchors the leaf in place so the operator doesn’t fight a flapping panel. When the solenoid in an electric lock stops releasing, when a Magnalock loses grip, or when a mechanical deadbolt jams, we repair or replace the lock and re-time it with the operator’s open/close cycle. Tarzana homeowners with alley-access gates or pedestrian gates beside the driveway call us for this more often than you’d think. It’s a 45-minute fix that keeps a back fence from being an open invitation.
Weld & Rust Repair
Steel gates in Tarzana rust from the inside out, especially at the bottom rails and the mitered corners where water sits after a rain. We grind back the corrosion, weld in new steel where the section loss is severe, and apply a zinc-rich primer and topcoat matched to the gate’s existing finish. For ornamental gates with scrollwork and pickets, our welders can reconstruct individual forged elements rather than replacing the whole leaf. The repair is documented with photos of the weld before primer and after paint, so you can see exactly what was done.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Repair
DoorKing operators are workhorses, but their control boards are sensitive to power surges, and their limit switches drift over time. We’ve serviced hundreds of DoorKing 9150 and 9024 swing operators across the San Fernando Valley, and our vans carry the common relays, capacitors, and receiver modules. Most DoorKing repairs are a board swap or a limit reset, not an operator replacement.
Elite gate operators are popular on gated estates in Tarzana, and they demand precise limit setting. A mis-set limit on an Elite SL3000 slide operator will burn out a motor in months. We re-set limits, calibrate the torque limiter, and photograph the final readings. If your gate has a Mighty Mule or LiftMaster opener, we stock parts for those too. The point is: we work on whatever motor is already on your property. We’re not here to sell you a replacement when a $90 arm bracket is all you need.
BeforeAfterSigns You Need Gate Repair Right Now
- The gate reversed before it hit the stop. A gate that reverses mid-travel usually means a misaligned photo-eye or a limit switch set past the physical stop. It’s a safety circuit doing its job, but if left unaddressed it will burn out the motor and then you’re into a much bigger bill.
- You can hear the operator running, but the gate isn’t moving. That telltale hum is the motor spinning against a stripped gear, a sheared arm bracket, or a decoupled chain. Running it repeatedly while it’s stuck will destroy the gearbox. Shut off power to the operator and call us.
- The gate scrapes or bounces on the driveway. Scraping is a mechanical fault, not a cosmetic one. It means the hinge plane has shifted, the post is out of plumb, or the track is out of level. The longer it runs like that, the more steel gets ground away and the more expensive the eventual repair.
- The remote opens one gate in one direction, but not the other. This is almost always a limit switch issue, not a remote issue. When one limit is set too far or too close to the travel, the operator gets confused about where it is in the cycle. It’s a quick fix if addressed early, but it can confuse a technician who doesn’t know the specific logic of your operator’s board.
- You have to lift the gate manually to get it to latch. A gate that won’t latch under its own weight is either sagging at the hinges or the post has moved. The fix is a realignment or a hinge replacement, not a new gate. But if you leave a sagging gate unaddressed, the hinges tear out of the steel and the repair goes from a $200 job to a $1,200 weld repair.
Our Gate Repair Process - Step by Step
- 1
Call and talk to a live person. When you call (424) 258-8818, a dispatcher answers. No voicemail loop, no callback queue. You describe the symptom, and we book a window that works for you. Before the technician leaves the shop, we text you their name and photo.
- 2
On-site diagnosis. The technician arrives in a stocked van and goes through the gate systematically: operator test, limit-switch reading, hinge inspection, track level, and photo-eye alignment. We use a multimeter to check voltage at the board and a laser level to check the gate plane. You don’t pay for guesswork. The flat diagnostic fee is quoted before we start turning screws.
- 3
Written price before any work begins. This is Haven Standard Clause 1. You get a written scope of work with a flat price, in dollars, before we pick up a single tool. Not an estimate range, not a handshake. A written number. If you sign off, we proceed. If you don’t, you pay the diagnostic fee and keep the report.
- 4
The repair. We complete the work on the spot in the majority of cases. For a weld repair or a post re-set that requires concrete to cure, we schedule the return visit before we leave the first one. Every adjustment is documented. Every part number is recorded.
- 5
Photo log and written record left with you. Before the van pulls away, you get a photo log of what was found, what was adjusted, what was replaced, and the final limit-switch settings. That record goes into our job file and yours. The next technician who works on your gate, whether that’s us or anyone else, won’t have to guess.
How Much Does Gate Repair Cost in Tarzana?
A typical gate repair in Tarzana runs $180 to $450 for most mechanical and electrical fixes. A hinge replacement with a welded plate is usually $250 to $500. Post re-setting with new concrete runs $500 to $1,200 depending on the post size and whether we’re working on a slope. A full operator replacement, when repair isn’t viable, runs $1,400 to $3,200 installed and programmed, depending on the brand and the access control add-ons.
What moves the price: the gate’s weight and length (bigger gate, bigger operator, more expensive hinge), the brand of operator (DoorKing and Elite parts are usually cheaper than niche imports), the condition of the post footings, and whether welding is required. What shouldn’t move the price: the technician’s mood, the time of day, or the size of your house. Before any work starts, you get a written flat price. That number doesn’t change unless the scope changes and you sign off on a revised written price. Have another company’s written estimate? Bring the paperwork. We’ll review it at no charge and give you a line-by-line comparison. That’s a free second opinion, no strings.
Gate Repair Near Tarzana - Our Service Area
We dispatch from our shop to Tarzana and the surrounding neighborhoods across the west San Fernando Valley every day. That includes gate repair in Reseda, gate repair in Encino, plus Canoga Park, Northridge, West Hills, Sherman Oaks, Van Nuys, Chatsworth, Studio City, North Hollywood, and San Fernando. Typical response is a same-visit or next-day appointment depending on the time you call. For a gate that’s stuck open or won’t close, we treat it as an emergency and move the schedule around to get there the same day.
Serving Tarzana, CA - Our Local Coverage Area
We’re based in the Tarzana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Repair in Tarzana
Gate repair is the process of diagnosing and fixing the mechanical, electrical, or structural faults that keep a driveway or pedestrian gate from opening, closing, latching, or staying in alignment. It covers everything from a dead operator board to a bent hinge to a rusted-out bottom rail. Most gate repairs in Tarzana take between one and three hours on site.
Most single-issue gate repairs are completed in one visit lasting one to three hours. Electrical faults like a bad limit switch or a burned capacitor are usually fixed in under an hour. Weld repairs and post re-sets take longer because the concrete or the paint needs to cure, and those jobs involve a scheduled return visit. We’ll tell you before we start which category your repair falls into.
A typical gate repair in Tarzana runs $180 to $450 for common mechanical and electrical issues. Hinge and weld repairs run $250 to $500 in most cases. A full operator replacement runs $1,400 to $3,200 installed. You’ll always get a written flat price before any work begins, so call (424) 258-8818 to get the number for your specific gate.
Yes. DoorKing, Elite, Mighty Mule, LiftMaster, FAAC, BFT, Linear, Viking, and Ghost Controls are the nine brands we service on a regular basis. We stock OEM parts for the most common failures in the brands popular in Tarzana. You don’t need to know what brand your operator is; we’ll identify it when we arrive and tell you what we can do with it.
In most cases, yes. A gate that’s stuck open or won’t close is a security emergency, and we shift the schedule to get a technician to your Tarzana home the same day you call. Call (424) 258-8818 any time. A live person answers, and we’ll get a technician dispatched as quickly as the route allows.
Every completed repair is covered by our 365-Day Done Right Promise. If the repair isn’t right, we make it right, no argument, no fee, no expiration date within that one-year window. The warranty covers our workmanship and the parts we installed. It doesn’t cover new damage or unrelated failures, but we’ll always tell you honestly which one you’re looking at.
Clear the gate’s travel path so we can cycle it safely, and if you have a pedestrian gate or a second access point, make sure we know where it is. Pull any vehicles out of the driveway if possible. If your gate is automated, locate the operator’s power switch, usually a dedicated breaker or a switch on the operator itself. If you can’t find it, don’t worry. We’ll handle it when we arrive. One note: for any repair involving high-tension springs or the gate’s main hinge points, stay clear while we work. Those components are under load even when the gate is open.
Schedule Your Gate Repair Service in Tarzana Today
When you call (424) 258-8818, a live person answers and schedules your appointment. You’ll get a written flat price before any work starts, a documented photo record when the work is done, and a full year of coverage under the Done Right Promise. No surprises, no pressure, no upsell. Just the repair your gate needs, done correctly the first time. Estimates are free.
Written by Adrian Vance, Owner at Vance Gate Repair Tarzana, serving Tarzana since 2014.