Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Chatsworth, CA
Gate access control in Chatsworth means keypads, remotes, phone entry, card readers, and video intercoms wired into gates that span 16 to 20 feet across horse-trailer driveways, not the narrow pedestrian gates you see in denser parts of the Valley. The rock-strewn sandy soil, 105°F summer heat, and Santa Ana debris loads change how those systems are mounted, wired, and maintained. If your gate won’t open from the keypad or the intercom stopped ringing inside the house, call (424) 258-8818 and a live person answers, day or night.
Why Chatsworth Homes Are Different
Chatsworth packs more horse properties per square mile than almost anywhere in Los Angeles, and that shapes nearly every gate we touch. The dominant stock is 1950s to 1980s ranch homes on half-acre to multi-acre lots, many with horse-keeping permits, and the gates are sized for trailers: 16 to 20-foot dual-swing or slide gates built from heavy agricultural pipe or wood, not ornamental iron. The Santa Susana Pass funnels Santa Ana winds straight into the basin, blasting posts, hinges, and slide tracks with gritty debris that accelerates wear on every moving part. Summer heat routinely tops 105°F while winters stay bone-dry, so steel frames cycle through serious thermal expansion, loosening lag bolts and post anchors that were often set in sandy, rock-strewn soil rather than solid concrete footings. Chatsworth also sits in a High Fire Hazard Severity Zone, where LA Fire code requires automatic operators to have working battery backup and an accessible manual release. During fire-watch evacuations, a stuck gate trapping a livestock trailer isn’t a convenience problem. It’s a life-safety call, and we treat it that way.
Our Main Chatsworth Services
Most Chatsworth homeowners reach out about one of three things: a repair on an existing perimeter gate, a full installation for a new driveway run, or a motor and opener that stopped responding. Here’s what each involves locally.
Gate Repair in Chatsworth
Repairs in Chatsworth usually mean hinges pulled loose from sandy footings, slide-gate rollers grinding through wind-blown grit, or wooden panels warped by the dry heat. We assess the damage, write a flat price before any tool comes out, and leave a photo record of every adjustment. Under the 365-Day Done Right Promise, if the repair isn’t right, Vance makes it right at no charge.
Gate Installation in Chatsworth
New gates in Chatsworth are sized for horse trailers and built to handle wind load off the Pass. That means deeper post footings, heavier hardware, and operators rated for high cycles. We measure, quote a written price, and schedule the build so you’re not waiting weeks on a property with livestock behind a temporary fence. See Gate Installation in Chatsworth for full details.
Gate Motor & Opener in Chatsworth
Motors and openers in Chatsworth work harder than almost anywhere in the Valley: high-cycle swing operators on ranch gates, slide operators chewing through debris, and battery-backup systems that must stay functional under fire-code rules. We service all nine major automation brands and never steer you toward a replacement when a repair is the right call. Details at Gate Motor & Opener in Chatsworth.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Chatsworth
Gate access control in Chatsworth has to survive conditions that kill cheaper electronics: 105°F summers baking keypads mounted on southern exposures, Santa Ana grit working into card-reader slots, and ranch-property distances that make long-range remotes and phone-entry systems the practical choice. Most systems here were originally installed years ago on 1950s to 1980s ranch properties, and many have never been upgraded for the fire-code battery-backup requirements now in force. Our Gate Access Control work covers whatever is already on the property, repaired or replaced to match the gate and the way you actually use it.
Keypad Entry
Signs you need it
The keypad works intermittently, some buttons don’t respond, or the code stopped opening the gate after a power blink.
What it costs in Chatsworth
Keypad entry service in Chatsworth typically runs $125 to $275 for standard units, with upgraded or weatherproof models at $225 to $475.
How we do it
We test the keypad at the unit, check wiring back to the operator, replace or reprogram as needed, and photograph the final settings before we leave.
Video Intercom
Signs you need it
The intercom rings at the gate but not inside the house, the camera image is dead, or audio cuts out when the Santa Anas kick up dust.
What it costs in Chatsworth
Video intercom work in Chatsworth generally falls between $300 and $800 depending on wiring condition and whether the existing cable can be reused.
How we do it
We trace the existing cable run, test the handset and gate station separately, replace only what failed, and photograph the wiring diagram for the job record.
Phone Entry
Signs you need it
The gate won’t dial your cell, calls drop when you try to open from the car, or the system only worked with a landline that’s long gone.
What it costs in Chatsworth
Phone entry service in Chatsworth typically runs $250 to $550, with cellular-capable units at the higher end.
How we do it
We confirm signal strength at the gate, install or reprogram the unit for cellular calling, and test opening from multiple phones before wrapping up.
What Gate Access Control Costs in Chatsworth
| Item | Typical range in Chatsworth |
|---|---|
| Keypad entry service | $125 – $275 standard, $225 – $475 upgraded |
| Phone entry service | $250 – $550 |
| Video intercom repair | $300 – $800 |
Do I need battery backup on my automatic gate in Chatsworth?
Yes. Chatsworth sits in a High Fire Hazard Severity Zone, and LA Fire code requires automatic gate operators to have working battery backup plus an accessible manual release. We stock bypass kits and battery units on every truck for exactly this reason.
Can you update my old keypad system without replacing the whole gate?
Almost always. We work with the operator you already have, whether it’s a Viking, DoorKing, Elite, or Ghost Controls unit, and replace only the access hardware that failed. Call (424) 258-8818 for a written quote before any work starts.
Gate Parts & Welding in Chatsworth
Gate parts and welding in Chatsworth is a different job than in most of the Valley because the gates themselves are different: heavy pipe rail, thick wooden panels, and 20-foot spans that get sandblasted by Santa Ana debris every wind season. Hinges pull loose from posts set in sandy rock-strewn soil, welds crack under repeated thermal cycling, and slide rails bow under the weight of gates sized for horse trailers. Our Gate Parts & Welding service replaces and repairs those structural components with the same documentation standard we apply to every job: written price first, photo record when we finish.
Hinge Replacement
Signs you need it
The gate sags, scrapes the ground at the latch end, or the hinge pin has worked its way out of the barrel.
What it costs in Chatsworth
Hinge replacement in Chatsworth typically runs $150 to $350 per hinge depending on gate weight and access.
How we do it
We lift and support the gate, remove the old hinge, weld or bolt the new one in place, and photograph the finished mount before testing the swing.
Post Replacement
Signs you need it
The post leans, the gate won’t latch square, or you can see cracks radiating through the concrete collar at ground level.
What it costs in Chatsworth
Post replacement in Chatsworth typically runs $400 to $800 per post, with concrete work included in the price.
How we do it
We excavate the failed post and footing, set a new galvanized post in fresh concrete poured below the frost-affected soil line, and brace it while it cures.
Rail Repair
Signs you need it
The rail is bowed, cracked, or the gate binds halfway through its travel on the slide track.
What it costs in Chatsworth
Rail repair in Chatsworth generally runs $300 to $600 depending on the extent of the damage and whether the rail needs straightening or replacement.
How we do it
We assess the rail for straightness and weld integrity, repair or replace the damaged section, and document the work with photos before testing under load.
What Gate Parts & Welding Costs in Chatsworth
| Item | Typical range in Chatsworth |
|---|---|
| Hinge replacement (per hinge) | $150 – $350 |
| Post replacement (per post) | $400 – $800 |
| Rail repair | $300 – $600 |
Do you weld on site or take the gate to a shop?
We weld on site in Chatsworth whenever the gate can be safely supported in place. For larger pipe gates or rail repairs that require full disassembly, we handle the removal, shop work, and reinstallation as one written scope.
Can you match the original steel profile on my ranch gate?
Yes. We carry common ranch-gate steel profiles and can source matching material for older Chatsworth properties where the original gate was built decades ago. The written quote includes the material spec before any work starts. Call (424) 258-8818 to schedule.
Brands We Service in Chatsworth
We work on Viking, Ghost Controls, DoorKing, and Elite equipment in Chatsworth, along with FAAC, BFT, Linear, LiftMaster, and Mighty Mule. Parts for common operators are stocked on our trucks, so most motor and access repairs finish in one visit without waiting on a distributor shipment. See our brands for the full list.
Pricing for Gate Repair in Chatsworth, CA
| Service | Typical range in Chatsworth |
|---|---|
| Keypad entry service | $125 – $475 |
| Remote control programming | $125 – $475 |
| Phone entry service | $250 – $550 |
| Card reader service | $250 – $550 |
| Video intercom repair | $300 – $800 |
| Hinge replacement (per hinge) | $150 – $350 |
| Post replacement (per post) | $400 – $800 |
| Rail repair | $300 – $600 |
| Custom welding (per hour) | $85 – $150 |
| Gate roller replacement | $125 – $300 |
What pushes prices up in Chatsworth: deeper footings needed in sandy rock-strewn soil, gates sized for horse trailers that require heavier hardware, and fire-code battery backup retrofits on older operators. Whatever the number, you get it in writing before any work starts. That’s Haven Standard Clause 1, and it’s non-negotiable on every job.
Neighborhoods We Serve in Chatsworth
We run calls across the whole Chatsworth area, from the horse properties west of Topanga Canyon Boulevard to the hillside builds tucked into the Santa Susana boulderscape. Response times during non-fire-season weeks typically run two to four hours for most gate repair calls.
- Santa Susana Knolls
- Lake Manor
- Rural Chatsworth (equestrian zone)
- Chatsworth Hills
- Devonshire Corridor
Service Area - Cities Near Chatsworth
If you’re in a neighboring community, we cover those too. Gate repair calls from Northridge, CA, Canoga Park, CA, Reseda, CA, and West Hills, CA dispatch with the same written-price-before-work standard we use in Chatsworth.
Serving Chatsworth, CA - Our Local Coverage Area
We’re based in the Chatsworth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Chatsworth
Most non-fire-season gate repair calls in Chatsworth are reached within two to four hours from the time you speak with us. During high-wind or fire-watch events, emergency calls are prioritized, and we keep battery backup and manual-release kits on every truck for exactly those situations.
Most automatic gate operators in Chatsworth fall under LA County building and fire requirements, which include battery backup and an accessible manual release in High Fire Hazard Severity Zones. We handle the equipment side of compliance and can point you to the right paperwork before installation.
Yes. Every estimate is free, written, and includes a flat price before any work begins. Bring us another company’s written estimate and Vance will review it at no cost, so you can compare what’s actually in scope. Call (424) 258-8818 to set one up.
If your gate won’t open, won’t close, or won’t answer the keypad, call (424) 258-8818. A live person picks up 24/7, and you’ll get a written price before any work starts. No voicemail loop, no surprise invoice, no guesswork.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Chatsworth Customers Say
"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.